Pixel Flow Level 2020
Play Pixel Flow now, Complete walkthrough and solution guide for Pixel Flow Level 2020. Master the pixel flow mechanics and solve this challenging puzzle.
Pixel Flow Video Tutorial
How to Play Pixel Flow
Observe the Path
First, look at the pixel path layout on screen. Identify starting and ending points that need connection. Check which paths are blocked and which are clear in Pixel Flow.
Plan Your Moves
Tap pixels to move them. Consider how each move affects future path connectivity. Handle easily disconnected paths first to avoid trapping pixels in Pixel Flow.
Match Colors
Make sure pixel colors match their target path colors. If colors don't match, find the right colored pixel to complete the connection in Pixel Flow.
Complete the Flow
When all pixels connect to their target paths forming a complete flow pattern, the Pixel Flow level is complete. Ensure no pixels are isolated or disconnected.
Pro Tips for This Pixel Flow Level
Start at the Edges
Corner and edge dots have fewer possible routes. Solve these first to reduce complexity in the center of this Pixel Flow level.
Find the Forced Moves
Some dots only have one possible path. Identify these "forced" connections first - they're guaranteed correct in Pixel Flow.
Watch for Bottlenecks
Narrow passages can only fit one path. Figure out which color needs that route before you block it in Pixel Flow.
Don't Overthink It
Sometimes the obvious path is the right one. If you've been stuck for a while, try the simplest solution first in this Pixel Flow level.
Pixel Flow Solution Guide
- 1
First priority: bluish-gray/light cyan. Clear the large patch of light cyan background at the top and left/right edges first. This is the outermost and most abundant color, and it's directly adjacent to the crossbows above. The goal isn't to clear all the cyan at once, but to quickly open up the passage in front of the crossbows on the left and right.
- 2
Once the crossbow is triggered, let it fire all its shots. Don't immediately deploy more pigs in the corresponding row, otherwise you'll waste ammunition on pixels the crossbow could have cleared for free. You have four crossbows on each side of your board; after one or two are triggered, a large gap will suddenly appear in the middle.
- 3
Second priority: Pink. After clearing the blue background, start clearing the large area of pink below, as well as the pink on the flamingos/subjects. Pay special attention to the lower left and middle lower areas, where there are enough pink pixels. Pink pigs with 20/40 shots are usually easier to clear, and this will also help trigger the crossbows in the lower left and right groups.
- 4
Third priority: Yellow. Once the central pink is thinned out, start using a lot of yellow. Yellow is concentrated mainly on the central body, near the legs, and in the middle lower area. If you use yellow too early, the attackable area is too fragmented, making it easy for 10-20 shots to remain and enter the waiting cao.
- 5
Then process wine red/deep pink → black/deep gray. Black and deep gray don't look too many now, but most of them belong to the outlines, which were covered by pink, yellow, and cyan in the early stages. Black shouldn't rush, otherwise it's one of the easiest colors to get stuck in the five waiting slots in this level.
- 6
In the mid-to-late game, continue to use the strategy of "prioritizing clearing the color in front of the side where the crossbow is about to be revealed." The wooden frame and crossbow are part of the mechanism; don't randomly fill them with colored pixels. First, remove the ordinary pixels right next to the crossbow's muzzle, letting the mechanism help you sweep the board horizontally. The official gameplay also emphasizes: prioritize clearing blockers and don't fill the active/waiting capacity too quickly.
- 7
Finally, collect the white, light gray, orange, and scattered small color blocks. By this stage, most crossbows should have been triggered, and the area will turn into several small islands. It's safest to use small ammo pigs to finish them off.
Common Mistakes in Pixel Flow
Avoid these common pitfalls that players encounter when trying to beat Pixel Flow Level 2020. Learning from these mistakes will help you solve the Pixel Flow puzzle faster.
Rushing Without Planning
Many players fail Pixel Flow Level 2020 because they start moving blocks immediately without analyzing the puzzle first. Take a moment to study the entire layout before making your first move.
✓ Solution: Pause and plan your complete solution path before touching any blocks in Pixel Flow.
Ignoring the Flow Sequence
In Pixel Flow Level 2020, the order of moves matters significantly. Moving blocks in the wrong sequence can block essential pathways and make the Pixel Flow puzzle unsolvable.
✓ Solution: Identify which blocks need to move first to clear the path for others in Pixel Flow.
Overlooking Color Matching
Pixel Flow Level 2020 requires matching specific colors to their destinations. Players often focus only on movement and forget about color alignment, leading to incomplete solutions.
✓ Solution: Always verify that colors match their designated endpoints before moving on in Pixel Flow.
Missing Hidden Pathways
Some pathways in Pixel Flow Level 2020 may not be immediately obvious. Players sometimes miss alternative routes that could provide easier solutions.
✓ Solution: Look carefully at all possible flow directions, including diagonal or indirect paths in Pixel Flow.
Not Using the Video Guide
When stuck on Pixel Flow Level 2020, some players keep trying random moves instead of watching the solution video. This wastes time and causes frustration.
✓ Solution: Watch our Pixel Flow video walkthrough above to see the exact solution when you're stuck.
Comments
Loading comments...